General and extended functions of swing gate

1) Fault self inspection and alarm prompt function, convenient for user maintenance and use;

2) Through the built-in small press disk on the main control board, the operation state of the programmable equipment;

3) Mechanical structure and induction double anti pinch function. When the swing arm is blocked during reset, it will automatically stop or the motor stops working within the default time. It will reset again after the default delay (until reset), and the force is very small (≤ 2kg);

4) Sound and light alarm function: including illegal intrusion and trailing alarm;

5) Anti impact function: when the opening signal is not received, the swing arm will be locked automatically;

6) Swing rod (ARM) synchronization function;

7) Automatic reset function: after opening the gate, if there is no passage within the specified time, the system will automatically cancel the user's permission to pass this time. The standard is automatic reset 5 seconds after opening;

8) After power failure, the channel will open automatically and close automatically after power on;

9) It can be connected with a variety of card reading equipment to receive relay switch signals;

10) One way or two-way control of personnel access;

11) Remote control and management can be realized directly through the management computer;

Extended functions:

1) Counting and alarm functions;

2) The chassis is lengthened, and the swing rod (swing arm) material is selected;

3) Selection of advertising space light box.